Effect of fly ash on mechanical properties and morphology of plasterboard based on recycled poly(ethylene terephthalate)
Authors
DOI: https://doi.org/10.15625/2525-2321.2017-00505Keywords:
Unsaturated polyester, Recycled PET, Fly ash, PlasterboardReferences
G. Martinez-Barrera, W. Brostow. Effect of marble particle size and gamma irradiation on mechanical properties of polymer concrete, E-Polymers, 61, 1-14 (2010).
I. Duque-Ingunza, R. López-Fonseca, B. Rivas, J. I. Gutiérrez-Ortiz. Synthesis of unsaturated polyester resin from glycolysed postconsumer PET wastes, J. Mater. Cycles. Waste. Manag., 15, 256-263 (2013).
B.W. Jo, S.K. Park, J.C. Park. Mechanical properties of polymer concrete made with recycled PET and recycled concrete aggregates. Constr. Build. Mater., 22, 2281-2291 (2008).
Lokuge W. P., Aravinthan T. Mechanical properties
of polymer concrete with different types of resin, Proceedings of the 22nd Australasian Conference on the mechanics of structures and materials, Sydney, Australia (2012).
F. Mahdi, H. Abbas, A. A. Khan. Strength characteristics of polymer mortar and concrete using different compositions of resins derived from post-consumer PET bottles, Constr. Build. Mater., 24, 25-36 (2010).
M. E. Tawfik, S. B. Eskander. Polymer concrete from marble wastes and recycled poly(ethylene terephthalate), J. Elastom. Plast., 38, 65-79 (2006).
F. Awaja, D. Pavel. Recycling of PET, Eur. Polym. J., 41, 1453-1477 (2005).
H.T. Vo, C. N. Hoang. Glycolization of polyethylene terephtalate (PET) from waste bottle by diethylene glycol (DEG), Sci. Tech. Dev., 11, 93-99 (2008).
J. R. Fried. Polymer Science and Technology, Proceedings of Prentice Hall PTR Conference Englewood Cliffs New Jersey (1995).
U. R. Vaidya, V.M. Nadkarni. Unsaturated polyester resins from poly(ethylene terephthalate) waste. 1. Synthesis and characterization, Ind. Eng. Chem. Res., 26, 194-198 (1987).
P. Đ. T. Văn, H. P. A. Trương, T. V. Nguyễn. Tái chế nhựa polyethylene terephthalate (PET) và ứng dụng nhựa đã qua tái chế, Tạp chí Khoa học Trường Đai học Cần Thơ, Phần A: Khoa học Tự nhiên, Công nghệ và Môi trường, 39, 57-65 (2015).
G. P. Speranza, R. A. Grigsby, M. E. Brennan. Liquid phase polyols which are alkylene oxide adducts of terephtalic esters from recycled polyethylene terephalate, In United State Patent Patent, 4485196 (1983).
M. H. Kamarudin, A. Z. Romli, M. H. Abidin. The evaluation of eggshell particulate size in unsaturated polyester via mechanical test, Proceedings of Malaysia Polymer International Conference: IOI Resort, Putrajaya (2009).
K. Saravana Raja Mohan, P. Jayabalan, A. Rajaraman. Properties of fly ash based coconut fiber composite, American J. Eng. Appl. Sci., 5, 29-34 (2012).
N. Halacheva, P. Novakov. Preparation of oligoester diols by alcoholytic destruction of poly(ethylene terephthalate), Polymer, 36, 867-874 (1995).
C. H. Chen, C. Y. Chen, Y. W. Lo, C. F. Mao, W. T. Liao.
Studies of glycolysis of poly(ethylene terephthalate) recycled from postconsumer soft-drink bottles. II. Factorial experimental design, J. Appl. Polym. Sci., 80, 956-962 (2001).
C. H. Chen, C. Y. Chen, Y.W. Lo, C. F. Mao, W. T. Liao. Studies of glycolysis of poly(ethylene terephthalate) recycled from postconsumer soft-drink bottles. I. Influences of glycolysis conditions, J. Appl. Polym. Sci., 80, 943-948 (2001).
C. H. Chen. Study of glycolysis of poly(ethylene terephthalate) recycled from postconsumer soft-drink bottles. III. Further investigation, J. Appl. Polym. Sci., 87, 2004-2010 (2002).
A. International. ASTM D7029-09. Standard test method for determination of reactivity of unsaturated polyesters and vinyl esters at 180.0F [82.2°C], In ASTM volume 08.03 Plastics (III): D5117 - latest; Reinforced plastic piping systems and chemical equipment; Plastic Building Products 08.03 (2009).
Y. J. Huang, J. S. Leu. Curing of unsaturated polyester resins. Effects of temperature and initiator: 1. Low temperature reactions, Polymer, 34, 295-304 (1993).
Downloads
Downloads
PDF Downloaded: 177