Free vibration and buckling of bidirectional functionally graded sandwich plates using an efficient Q9 element

Authors

DOI:

https://doi.org/10.15625/0866-7136/15981

Keywords:

BFGSW plate, Q9 element, linked interpolation, vibration and buckling analysis.

Abstract

Free vibration and buckling of three-phase bidirectional functionally graded sandwich (BFGSW) plates are studied in this paper for the first time by using an efficient nine-node quadrilateral (Q9) element. The core of the sandwich plates is pure ceramic, while the two skin layers are of a three-phase bidirectional functionally graded material. The element is derived on the basis of the Mindlin plate theory and linked interpolations. Fundamental frequencies and buckling loads are computed for the plates with various boundary conditions. Numerical result shows that convergence of the linked interpolation element is faster compared to the conventional Lagrangian interpolation Q9 element. Numerical investigations are carried out to highlight the influence of the material gradation and the side-to-thickness ratio on the vibration and buckling behaviour of the plates.

Downloads

Download data is not yet available.

Metrics

Metrics Loading ...

References

V. Birman and L. W. Byrd. Modeling and analysis of functionally graded materials and structures. Applied Mechanics Reviews, 60, (5), (2007), pp. 195–216. DOI: https://doi.org/10.1115/1.2777164

K. Swaminathan, D. T. Naveenkumar, A. M. Zenkour, and E. Carrera. Stress, vibration and buckling analyses of FGM plates-A state-of-the-art review. Composite Structures, 120, (2015), pp. 10–31. DOI: https://doi.org/10.1016/j.compstruct.2014.09.070

Y. Fukui. Fundamental investigation of functionally gradient material manufacturing system using centrifugal force. Japan Society of Mechanical Engineering International Journal, Series III: Vibration, Control Engineering, Engineering for Industry, 34, (1), (1991), pp. 144–148. DOI: https://doi.org/10.1299/jsmec1988.34.144

A. M. Zenkour. A comprehensive analysis of functionally graded sandwich plates: Part 1—Deflection and stresses. International Journal of Solids and Structures, 42, (2005), pp. 5224– 5242. DOI: https://doi.org/10.1016/j.ijsolstr.2005.02.015

A. M. Zenkour. A comprehensive analysis of functionally graded sandwich plates: Part 2—Buckling and free vibration. International Journal of Solids and Structures, 42, (2005), pp. 5243–5258. DOI: https://doi.org/10.1016/j.ijsolstr.2005.02.016

A. M. Zenkour and M. Sobhy. Thermal buckling of various types of FGM sandwich plates. Composite Structures, 93, (2010), pp. 93–102. DOI: https://doi.org/10.1016/j.compstruct.2010.06.012

Q. Li, V. P. Iu, and K. P. Kou. Three-dimensional vibration analysis of functionally graded material sandwich plates. Journal of Sound and Vibration, 311, (1–2), (2008), pp. 498–515. DOI: https://doi.org/10.1016/j.jsv.2007.09.018

S. Xiang, Y. X. Jin, Z. Y. Bi, S. X. Jiang, and M. S. Yang. A n-order shear deformation theory for free vibration of functionally graded and composite sandwich plates. Composite Structures, 93, (11), (2011), pp. 2826–2832. DOI: https://doi.org/10.1016/j.compstruct.2011.05.022

S. Xiang, G. W. Kang, M. S. Yang, and Y. Zhao. Natural frequencies of sandwich plate with functionally graded face and homogeneous core. Composite Structures, 96, (2013), pp. 226– 231. DOI: https://doi.org/10.1016/j.compstruct.2012.09.003

A. M. A. Neves, A. J. M. Ferreira, E. Carrera, M. Cinefra, C. M. C. Roque, R. M. N. Jorge, and C. M. Soares. Static, free vibration and buckling analysis of isotropic and sandwich functionally graded plates using a quasi-3D higher-order shear deformation theory and a meshless technique. Composites Part B: Engineering, 44, (1), (2013), pp. 657–674. DOI: https://doi.org/10.1016/j.compositesb.2012.01.089

H. T. Thai and D. H. Choi. Finite element formulation of various four unknown shear deformation theories for functionally graded plates. Finite Elements in Analysis and Design, 75, (2013), pp. 50–61. DOI: https://doi.org/10.1016/j.finel.2013.07.003

H. T. Thai and S. E. Kim. A simple higher-order shear deformation theory for bending and free vibration analysis of functionally graded plates. Composite Structures, 96, (2013), pp. 165– 173. DOI: https://doi.org/10.1016/j.compstruct.2012.08.025

H. T. Thai, T. K. Nguyen, T. P. Vo, and J. Lee. Analysis of functionally graded sandwich plates using a new first-order shear deformation theory. European Journal of Mechanics-A/Solids, 45, (2014), pp. 211–225. DOI: https://doi.org/10.1016/j.euromechsol.2013.12.008

L. Iurlaro, M. Gherlone, and M. DiSciuva. Bending and free vibration analysis of functionally graded sandwich plates using the refined zigzag theory. Journal of Sandwich Structures & Materials, 16, (6), (2014), pp. 669–699. DOI: https://doi.org/10.1177/1099636214548618

S. Pandey and S. Pradyumna. Analysis of functionally graded sandwich plates using a higher-order layerwise theory. Composites Part B: Engineering, 153, (2018), pp. 325–336. DOI: https://doi.org/10.1016/j.compositesb.2018.08.121

Z. Belabed, A. A. Bousahla, M. S. A. Houari, A. Tounsi, and S. R. Mahmoud. A new 3-unknown hyperbolic shear deformation theory for vibration of functionally graded sandwich plate. Earthquakes and Structures, 14, (2), (2018), pp. 103–115.

A. A. Daikh and A. M. Zenkour. Effect of porosity on the bending analysis of various functionally graded sandwich plates. Materials Research Express, 6, (6), (2019). DOI: https://doi.org/10.1088/2053-1591/ab0971

C. I. Le, V. N. Pham, and D. K. Nguyen. Free vibration of FG sandwich plates partially supported by elastic foundation using a quasi-3D finite element formulation. Vietnam Journal of Mechanics, 42, (1), (2020), pp. 63–86. DOI: https://doi.org/10.15625/0866-7136/14701

P. S. Ghatage, V. R. Kar, and P. E. Sudhagar. On the numerical modelling and analysis of multi-directional functionally graded composite structures: A review. Composite Structures, 236, (2020). DOI: https://doi.org/10.1016/j.compstruct.2019.111837

O. C. Zienkiewicz, Z. Xu, L. F. Zeng, A. Samuelsson, and N.-E. Wiberg. Linked interpolation for Reissner-Mindlin plate elements: Part I—A simple quadrilateral. International Journal for Numerical Methods in Engineering, 36, (1993), pp. 3043–3056. DOI: https://doi.org/10.1002/nme.1620361802

R. L. Taylor and F. Auricchio. Linked interpolation for Reissner-Mindlin plate elements: Part II—A simple triangle. International Journal for Numerical Methods in Engineering, 36, (1993), pp. 3057–3066. DOI: https://doi.org/10.1002/nme.1620361803

Z. Xu, O. C. Zienkiewicz, and L. F. Zeng. Linked interpolation for Reissner-Mindlin plate elements: Part III—An alternative quadrilateral. International Journal for Numerical Methods in Engineering, 37, (1994), pp. 1437–1443. DOI: https://doi.org/10.1002/nme.1620370902

D. Ribarić and G. Jelenić. Higher-order linked interpolation in quadrilateral thick plate finite elements. Finite Elements in Analysis and Design, 51, (2012), pp. 67–80. DOI: https://doi.org/10.1016/j.finel.2011.10.003

D. Ribarić and G. Jelenić. Higher-order linked interpolation in triangular thick plate finite elements. Engineering Computations, 31, (2014), pp. 69–109. DOI: https://doi.org/10.1108/EC-03-2012-0056

M. Nemat-Alla, K. I. Ahmed, and I. Hassab-Allah. Elastic–plastic analysis of two-dimensional functionally graded materials under thermal loading. International Journal of Solids and Structures, 46, (2009), pp. 2774–2786. DOI: https://doi.org/10.1016/j.ijsolstr.2009.03.008

D. K. Nguyen, T. T. Tran, V. N. Pham, and N. A. T. Le. Dynamic analysis of an inclined sandwich beam with bidirectional functionally graded face sheets under a moving mass. European Journal of Mechanics/A Solids, 88, (2021). DOI: https://doi.org/10.1016/j.euromechsol.2021.104276

S. S. Akavci. Mechanical behavior of functionally graded sandwich plates on elastic foundation. Composites Part B: Engineering, 96, (2016), pp. 136–152. DOI: https://doi.org/10.1016/j.compositesb.2016.04.035

O. C. Zienkiewicz and R. L. Taylor. The Finite Element Method, volume 2: Solid Mechanics. Butterworth Heinemann, (2020).

Downloads

Published

18-07-2021

How to Cite

Le, C. I., Tran, Q. D., Pham, V. N., & Nguyen, D. K. (2021). Free vibration and buckling of bidirectional functionally graded sandwich plates using an efficient Q9 element. Vietnam Journal of Mechanics, 43(3), 277–295. https://doi.org/10.15625/0866-7136/15981

Issue

Section

Research Paper